Search Results

ENGLISH

Application Of Fracture Mechanics To Polymers, Adhesives And Composites

159,00€ + 10% CARD

 Application of Fracture Mechanics to Polymers, Adhesives and Composites
ENGLISH

Fracture Of Polymers, Composites And Adhesives

by A Pavan e J.G. Williams

205,38€ + 10% CARD

 This book contains a selection of fully peer-reviewed papers which were presented at the 2nd ESIS TC4 Conference, held in Les Diablerets, Switzerland 13 - 15 September 1999. The meeting was designed to reflect the activities of the Committee over the last 15 years, and to plan future activities. The papers have been divided into four chapters under the headings of Composites, Elastic-Plastic Fracture, Adhesion, and Impact and General Fracture. These are convenient groupings, but there are many interactions between the areas, with the common theme of Fracture Mechanics underlying it all.
ENGLISH

Fracture Mechanics: Applications And Challenges

by A. Martin-Meizoso, J.-M. Martinez-Esnaola, M. Elices e M. Fuentes

165,63€ + 10% CARD

 Contains 15 peer-reviewed Invited Papers which were presented at the 13th Biennial European Conference on Fracture. This book contributes to the understanding of fracture phenomena, and disseminates fracture concepts and their application to the solution of engineering problems to practitioners in a range of fields.
ENGLISH

Fatigue Design Of Components

132,50€ + 10% CARD

 Contains papers presented at Fatigue Design 95 held in Helsinki, Finland from 5-8 September 1995. The papers present practical aspects for the design of components and structures to avoid fatigue failure. Topics covered include: fatigue design experiences, ground vehicle components, component reliability, multiaxial fatigue, and more.
ENGLISH

From Charpy To Present Impact Testing

by A. Pineau e D. Francois

178,88€ + 10% CARD

 From Charpy to Present Impact Testing contains 52 peer-reviewed papers selected from those presented at the Charpy Centenary Conference held in Poitiers, France, 2-5 October 2001. The name of Charpy remains associated with impact testing on notched specimens. At a time when many steam engines exploded, engineers were preoccupied with studying the resistance of steels to impact loading. The Charpy test has provided invaluable indications on the impact properties of materials. It revealed the brittle ductile transition of ferritic steels. The Charpy test is able to provide more quantitative results by instrumenting the striker, which allows the evolution of the applied load during the impact to be determined. The Charpy test is of great importance to evaluate the embrittlement of steels by irradiation in nuclear reactors. Progress in computer programming has allowed for a computer model of the test to be developed; a difficult task in view of its dynamic, three dimensional, adiabatic nature. Together with precise observations of the processes of fracture, this opens the possibility of transferring quantitatively the results of Charpy tests to real components. This test has also been extended to materials other than steels, and is also frequently used to test polymeric materials. Thus the Charpy test is a tool of great importance and is still at the root of a number of investigations; this is the reason why it was felt that the centenary of the Charpy test had to be celebrated. The Societe Francaise de Metallurgie et de Materiaux decided to organise an international conference which was put under the auspices of the European Society for the Integrity of Structures (ESIS). This Charpy Centenary Conference (CCC 2001) was held in Poitiers, at Futuroscope in October 2001. More than 150 participants from 17 countries took part in the discussions and about one hundred presentations were given. An exhibition of equipment showed, not only present day testing machines, but also one of the first Charpy pendulums, brought all the way from Imperial College in London. From Charpy to Present Impact Testing puts together a number of significant contributions. They are classified into 6 headings: *Keynote lectures,*Micromechanisms,*Polymers,*Testing procedures,*Applications,*Modelling.
ENGLISH

Biaxial/Multiaxial Fatigue And Fracture

198,75€ + 10% CARD

 Deals with the theoretical, numerical and experimental aspects of the Multiaxial fatigue and fracture of engineering materials and structures.
ENGLISH

Fracture Mechanics Testing Methods For Polymers, Adhesives And Composites

by A Pavan, D.R. Moore e J.G. Williams

159,00€ + 10% CARD

 Provides an overview of ESIS Technical Committee 4's activities since the mid-1980s. This work describes a range of tests.
ENGLISH

Temperature-Fatigue Interaction

by J. Petit e L. Remy

185,50€ + 10% CARD

 This volume contains a selection of peer-reviewed papers presented at the International Conference on Temperature-Fatigue Interaction, held in Paris, May 29-31, 2001, organised by the Fatigue Committee of the Societe Francaise de Metallurgie et de Materiaux (SF2M), under the auspices of the European Structural Integrity Society. The conference disseminated recent research results and promoting the interaction and collaboration amongst materials scientists, mechanical engineers and design engineers. Many engineering components and structures used in the automotive, aerospace, power generation and many other industries experience cyclic mechanical loads at high temperature or temperature transients causing thermally induced stresses. The increase of operating temperature and thermal mechanical loading trigger the interaction with time-dependent phenomena such as creep and environmental effects (oxidation, corrosion). A large number of metallic materials were investigated including aluminium alloys for the automotive industry, steels and cast iron for the automotive industry and materials forming, stainless steels for power plants, titanium, composites, intermetallic alloys and nickel base superalloys for aircraft industry, polymers. Important progress was observed in testing practice for high temperature behaviour, including environment and thermo-mechanical loading as well as in observation techniques. A large problem which was emphasized is to know precisely service loading cycles under non-isothermal conditions. This was considered critical for numerous thermal fatigue problems discussed in this conference.
ENGLISH

Fatigue Design And Reliability

by G. Marquis e J. Solin

139,13€ + 10% CARD

 This volume represents a selection of papers presented at the Third International Symposium on Fatigue Design, Fatigue Design 1998, held in Espoo, Finland, 26-29 May, 1998.
ENGLISH

Minimum Reinforcement In Concrete Members

by A. Carpinteri

OUT OF STOCK OR NOT AVAILABLE

 Proposes a LEFM model, according to which reinforcement reactions are applied directly on the crack surfaces and a compatibility condition is locally imposed on the crack opening displacement in correspondence with the reinforcement.
ENGLISH

Fracture Of Polymers, Composites And Adhesives Ii - 3rd Esis Tc4 Conference

OUT OF STOCK OR NOT AVAILABLE
ENGLISH

Biaxial/Multiaxial Fatigue And Fracture

by Andrea Spagnoli

OUT OF STOCK OR NOT AVAILABLE

 Deals with the theoretical, numerical and experimental aspects of the Multiaxial fatigue and fracture of engineering materials and structures.
ENGLISH

Fracture Mechanics: Applications And Challenges - Applications And Challenges : Invited Papers Presented At The 13th European Conference On Fracture

by A. (Ceit, San Sebastian, Spain) Martin-Meizoso, J.-M. (Ceit, San Sebastian, Spain) Martinez-Esnaola, M. (Ceit, San Sebastian, Spain) Fuentes e M. (Umd, Madrid, Spain) Elices

OUT OF STOCK OR NOT AVAILABLE

 Contains 15 peer-reviewed Invited Papers which were presented at the 13th Biennial European Conference on Fracture. This book contributes to the understanding of fracture phenomena, and disseminates fracture concepts and their application to the solution of engineering problems to practitioners in a range of fields.
ENGLISH

Temperature-Fatigue Interaction - International Conference On Temperature-Fatigue Interaction, Paris, May 29-31 2001

OUT OF STOCK OR NOT AVAILABLE

 Contains a selection of papers presented at the International Conference on Temperature-Fatigue Interaction, organised by the Fatigue Committee of the Societe Francaise de Metallurgie et de Materiaux (SF2M), under the auspices of the European Structural Integrity Society.
ENGLISH

Application Of Fracture Mechanics To Polymers, Adhesives And Composites

OUT OF STOCK OR NOT AVAILABLE
ENGLISH

Fracture Mechanics Testing Methods For Polymers, Adhesives And Composites

by A Pavan, D.R. (Business Research Associate, Ici Plc, Uk) Moore e J.G. (Mechanical Engineering Department, Imperial College, London, Uk) Williams

OUT OF STOCK OR NOT AVAILABLE

 Provides an overview of ESIS Technical Committee 4's activities since the mid-1980s. This work describes a range of tests.
ENGLISH

Multiaxial Fatigue And Fracture

by E. Macha e W. Bedkowski

OUT OF STOCK OR NOT AVAILABLE

 Deals with theoretical, computational and experimental aspects of the multiaxial fatigue and fracture of engineering materials and structures. This book includes categories such as: Proportional cyclic loading; Non-proportional cyclic loading; Variable amplitude and random loading; and Crack growth.
ENGLISH

Fatigue Design Of Components - A Collection Of Papers Presented At Fatigue Design 95, Helsinki, Finland, 5-8 September 1995

OUT OF STOCK OR NOT AVAILABLE

 Contains papers presented at Fatigue Design 95 held in Helsinki, Finland from 5-8 September 1995. The papers present practical aspects for the design of components and structures to avoid fatigue failure. Topics covered include: fatigue design experiences, ground vehicle components, component reliability, multiaxial fatigue, and more.

DIDN'T FIND WHAT YOU'RE LOOKING FOR?

Browse by the menu categories.

Check the search criteria in help .

Finally, if needed, use the we'll search for you .