Search Results

ENGLISH

Advances In Cryogenic Engineering Materials

330,59€ + 10% CARD

 The 1995 International Cryogenic Materials Conference (lCMC) was held at the Greater Columbus Convention Center in Columbus, Ohio, in conjunction with the Cryogenic Engineering Conference (CEC) on July 17-21. The interdependent subjects of the two conferences attracted more than eight hundred participants, who came to share the latest advances in low-temperature materials science and technology. They also came for the important by products of the conferences: identification of new research areas, of collaborative research possibilities, and the establishment and renewal of exploration professional relationships. Ted Collings (Ohio State University), as Chairmen of the 1995 ICMC; Ted Hartwig (Texas A&M University), as Program Chairman; and twenty-one other Program Committee members expertly arranged the ICMC technical sessions and related activities. The contributions of the CEC board and its Conference Chairman James B. Peeples of CVI, Inc., were central to the success of the eleventh CEC/ICMC. Jeff Bergen of Lake Shore Cryogenics served as Exhibits Chairman. Local arrangements and conference management were expertly handled under the guidance of Centennial Conferences, Inc. Skillful assistance with editing and preparation ofthese proceedings was provided by Ms. Vicky Bardos ofSynchrony, Inc.
ENGLISH

Advances In Cryogenic Engineering Materials

330,59€ + 10% CARD

 Proceedings of the Twelfth International Cryogenic Materials Conference (ICMC) held in Portland, Oregon, July 28-August 1, 1997
ENGLISH

Advances In Cryogenic Engineering

330,59€ + 10% CARD

 Proceedings of the 1997 Conference held in Portland, Oregon, July 28-August 1,1997
ENGLISH

Advances In Cryogenic Engineering - Proceedings Of The 1961 Cryogenic Engineering Conference University Of Michigan Ann Arbor, Michigan August 15-17, 1961

by K.D. Timmerhaus

59,61€ + 10% CARD

 The 1961 Cryogenic Engineering Conference Committee is pleased to present the papers of the 1961 Cryogenic Engineering Conference. The Conference Committee in presenting the papers oftbis Conference takes this opportunity to acknowledge the assistance of an Editorial Committee in the selection of papers for the program.
ENGLISH

Advances In Cryogenic Engineering - Proceedings Of The 1969 Cryogenic Engineering Conference University Of California At Los Angeles, June 16-18, 1969

by K. D. Timmerhaus

59,61€ + 10% CARD

 1969 marked the return of the Cryogenic Engineering Conference, now affiliated with the National Academy ofSciences through the Division ofEngineering, National Research Council, to the University of California at Los Angeles. As in 1962, the Cryogenic Engineering Conference gratefully acknowledges the assistance of UCLA, its Engineering and Physical Seien ces Extension Division, and in particular J. Dillon, S. Houston, H. L. Tallman, and their stafffor serving as hosts to the 1969 Cryogenic Engineering Conference. The National Academy of Sciences is a private honorary organization of more than 700 scientists and engineers elected on the basis of outstanding contributions to knowledge. Established by a Congressional Act of Incorporation, the Academy works to further science and its use for the general welfare by bringing together the most qualified individuals to deal with scientific and technological problems of broad significance. The National Research Council was organized as an agency of the National Academy of Sciences in 1916, to enable the broad community of U.S. scientists and engineers to associate their efforts with the Iimited membership of the Academy in service to science and the nation. The Division of Engineering is one of the eight major Divisions into which the National Research Council is organized for the conduct of its work. Its membership includes representatives of the nation's leading technical societies as weH as a number of members-at-Iarge. The Cryogenic Engineering Conference is an organization of the Division of Engineering.
ENGLISH

Advances In Cryogenic Engineering - Proceedings Of The 1966 Cryogenic Engineering Conference University Of Colorado Engineering Research Center And Cryogenics Division Nbs Institute For

by K. D. Timmerhaus

171,59€ + 10% CARD

 The University of Colorado and the National Bureau of Standards have once again served as hosts for the Cryogenic Engineering Conference in Boulder, Colorado.
ENGLISH

Advances In Cryogenic Engineering

118,59€ + 10% CARD

 With the 1975 Cryogenic Engineering Conference this se ries enters the third decade of presenting the latest advances in the field of cryogenic engineering. The Cryogenic Engineering Conference was also pleased to have the InternaÂ tional Cryogenic Materials Conference join them in this meeting.
ENGLISH

Advances In Cryogenic Engineering - Proceedings Of The 1972. Cryogenic Engineering Conference. National Bureau Of Standards. Boulder, Colorado. August 9-11, 1972

by K. D. Timmerhaus

118,59€ + 10% CARD

 The National Bureau of Standards Boulder Laboratories at Boulder, Colorado once again served as the host for the 1972 Cryogenic Engineering Conference.
ENGLISH

Advances In Cryogenic Engineering - Proceedings Of The 1964 Cryogenic Engineering Conference (Sections A-L)

by K. D. Timmerhaus

59,61€ + 10% CARD

 Support from the National Science Foundation has made it possible for the tenth annual Cryogenic Engineering Conference, hosted by the University of Pennsylvania and capably directed by K.
ENGLISH

Advances In Cryogenic Engineering - Proceedings Of The 1957 Cryogenic Engineering Conference, National Bureau Of Standards Boulder, Colorado, August 19-21, 1957

by K. D. Timmerhaus

118,59€ + 10% CARD

 By popular request, the National Bureau of Standards was again a host to a conference on cryogenic engineering on August 19-21, 1957. Similar meetings were held here in 1954 and 1956. The acceptance of over forty papers for this conference was certainly a sign of the increasing activity and interest in this engineering field. There seems little doubt that it will continue to grow, justifying the need for annual meetings. To make the Proceedings more interesting an attempt was made to include as much as possible of the general discussion which followed each paper. To obtain individual reprints of anyone particular paper, please contact the authors directly. 1957 CRYOGENIC ENGINEERING CONFERENCE COMMITTEE B. W. Birmingham National Bureau of Standards S. C. Collins Massachusetts Institute of Technology E. F. Hammel Los Alamos Scientific Laboratory R. B. Scott National Bureau of Standards K. D. Timmerhaus University of Colorado W. T. Ziegler Georgia Institute of Technology i ACKNOWLEDGMENTS The 1957 Cryogenic Engineering Conference Committee gratefully acknowledges the continued support and interest of the following organizations who have made the 1957 Cryogenic Engineering Conference and the publication of this Proceedings possible. L'' Air Liquide Air Products, Inc. Allison Division, General Motor s American Messer Corporation Aro Equipment Corporation Beech Aircraft Corporation Bell Aircraft Boeing Airplane Company Cambridge Corporation Convair Curtiss-Wright Corporation Garrett Corporation General Electric Company Herrick L. Johnston, Inc. Hofman Laboratories Linde Company A. D. Little, Inc.
ENGLISH

Advances In Cryogenic Engineering - Proceedings Of The 1954 Cryogenic Engineering Conference National Bureau Of Standards Boulder, Colorado September 8-10 1954

by K. D. Timmerhaus

118,59€ + 10% CARD

 Cryogenic engineering is concerned with developing and improving low temperature processes, techniques, and equipment; It is rather difficult to assign a definite temperature which serves to divide refrigerating engineering from cryogenic engineering.
ENGLISH

Advances In Cryogenic Engineering

330,59€ + 10% CARD

 In recent years, the technology of cryogenic comminution has been widely applied in the field of chemical engineering, food making, medicine production, and particularly in recycling of waste materials. Because of the increasing pollution of waste tires and the shortage of raw rubber resource, the recycling process for waste rubber products has become important and commercially viable. This technology has shown a great number of advantages such as causing no environmental pollution, requiring low energy consumption and producing high quality products. Hence, the normal crusher which was used to reclaim materials, such as waste tires, nylon, plastic and many polymer materials at atmospheric 12 temperature is being replaced by a cryogenic crusher. * In the cryogenic crusher, the property of the milled material is usually very sensitive to temperature change. When a crusher is in operation, it will generate a great deal of heat that causes the material temperature increased. Once the temperature increases over the vitrification temperature, the material property will change and lose the brittle behavior causing the energy consumption to rise sharply. Consequently, the comminution process cannot be continued. Therefore, it is believed that the cryogenic crusher is the most critical component in the cryogenic comminution system. The research on the temperature increase and energy consumption in the cryogenic crusher is not only to reduce the energy consumption of the crasher, but also to reduce the energy consumption of the cryogenic system.
ENGLISH

Advances In Cryogenic Engineering

59,61€ + 10% CARD

 Proceedings of the 1991 Cryogenic Engineering Conference held in Huntsville, Alabama, June 11-14, 1991.
ENGLISH

Advances In Nuclear Science And Technology

59,61€ + 10% CARD

 The editors are pleased to present to the nuclear com- munity our new-look annual review. In its new look, with Plenum our new publisher, we may hope for a more rapid pre- sentation to our audience of the contents for their consi- deration; the contents themselves, however, are motivated from the same spirit as the first nine volumes, reviews of important developments in both a historical and an anticipa- tory vein, interspersed with occasional new contributions that seem to the editors to have more than ephemeral interest. In this volume the articles are representative of the editorial board policy of covering a range of pertinent topics from abstract theory to practice and include reviews of both sorts with a spicing of something new. Conn's review of a conceptual design of a fusion reactor is timely in bringing to the attention of the general nuclear community what is perhaps well known to those working in fusion - that practical fusion reactors are going to require much skillful and complex engineering to make the bright hopes of fusion as the inex- haustible energy source bear fruit. Werner's review of nu- merical solutions for fission reactor kinetics, while not exactly backward looking, is at least directed to what is now a well established, almost conventional field. Fabic's sum- mary of the current loss-of-coolant accident codes is one realisation of the intensity of effort that enables us to call a light water reactor 'conventional.
ENGLISH

Advances In Cryogenic Engineering Materials

59,61€ + 10% CARD

 The Sixth International Cryogenic Materials Conference (ICMC) was held on the campus of Massachusetts Institute of Technology in Cambridge in col- laboration with the Cryogenic Engineering Conference (CEC) on August 12-16, 1985. Fitzgerald, Chairman of Special Events, skillfully managed the joint conference.
ENGLISH

Advances In Cryogenic Engineering Materials - Volume 30

59,61€ + 10% CARD

 The Fifth International Cryogenic Materials Conference (ICMC) was held in Colorado Springs, Colorado in collaboration with the Cryogenic Engineering Conference (CEC) on August 15-19, 1983.
ENGLISH

Advances In Cryogenic Engineering

95,40€ + 10% CARD

 Colorado Springs, Colorado, spectacularly located at the foot of Pike's Peak, was the site of the joint 1983 Cryogenic Engineer ing Conference - International Cryogenic Materials Conference. Volume 29 of Advances in Cryogenic Engineering contains 116 of the papers presented at the 1983 Cryogenic Engineering Confer ence.
ENGLISH

Advances In Cryogenic Engineering

118,59€ + 10% CARD

 The Cryogenic Engineering Conference celebrated its Silver Anniversary at the 1979 Conference held at Madison, Wisconsin. The papers presented at this joint conference as part of the International Cryogenic Materials Conference will be published as Volume 26 of the Advances in Cryogenic Engineering.
ENGLISH

Advances In Cryogenic Engineering - Volume 22

59,61€ + 10% CARD

 The First International Cryogenic Materials Conference (ICMC) provided a new forum for the presentation of low-temperature materials research. The confer ence, held in conjunction with the 1975 Cryogenic Engineering Conference, provided materials research personnel with excellent exposure to current develop ments in the cryogenics field and beneficial interactions with designers of cryogenic systems. Because of the large response to a late call for papers, the enthusiasm and encouragement at the meeting, and the wide spectrum and high quality of papers, the Second International Cryogenic Materials Conference is being planned along with the 1977 Cryogenic Engineering Conference for Boulder, Colorado, in the summer of 1977. The success of the First International Cryogenic Materials Conference was certainly in large measure due to the excellent hospitality of our Canadian hosts, the Royal Military College of Canada and Queen''s University in Kingston, Ontario. In particular, the efforts of A. C. Leonard and his staff ensured an excellent conference and a pleasant and memorable visit to Canada. The Cryogenic Engineering Conference Board was both generous and skillful in helping to initiate this new conference and their guidance and acceptance is gratefully acknowledged. The Cryogenic Engineering Conference program chairman, M. J. Hiza, greatly facilitated the interaction for the two conferences and provided valuable assistance in generat ing a workable program. The proceedings of the 1975 Cryogenic Engineering Conference are published as Volume 21 of the Advances in Cryogenic Engineering and include many papers indicating innovative use of new cryogenic materials properties data.
ENGLISH

Advances In Cryogenic Engineering

59,61€ + 10% CARD

 The year 1973 marked the first time that Atlanta, one of the cultural centers of the South, has hosted the Cryogenic Engineering Conference since its beginning in 1954. These included a Conference theme on the subject of "Energy and the Environment," a new Conference format, and the beginning of a new Conference frequency of biennial meetings.
ENGLISH

Advances In Cryogenic Engineering

59,61€ + 10% CARD

 In late 1877, Louis Cailletete in France and Raoul Pictet in Switzerland independently succeeded in liquefying oxygen, thereby proving a hypothesis set forth by Antoine Lavoisier nearly 100 years earlier. The theme of the 1977 Cryogenic Engineering Conference "Cryogenics: A Century of Progress-A Chal lenge for the Future" properly commemorated this accomplishment by reviewing some of the noteworthy advances since that time and outlining many advances still to come. Both Volumes 23 and 24 of this series provide a good account of the many contributions that were presented at this conference. The 1977 Cryogenic Engineering Conference was appropriately again held in Boulder, Colorado where the first Cryogenic Engineering Conference was initiated 23 years ago by the late Russell B. Scott, then Chief of the Cryogenic Engineering Laboratory of the National Bureau of Standards. The Cryogenic Engineering Conference Board is extremely grateful to members of the National Bureau of Standards and the University of Colorado for serving as hosts for this meeting of cryogenic specialists from all over the world. The Cryogenic Engineering Conference is again pleased to have had the International Cryogenic Materials Conference co-host this biennial meeting for the second time in succession. This joint effort again has permitted an in-depth coverage of research on technical materials in areas currently receiving primary attention by the cryogenic engineering community. The Proceedings of the Inter national Cryogenic Materials Conference will be published as Volume 24 of the Advances in Cryogenic Engineering.
ENGLISH

Advances In Cryogenic Engineering Materials

by R.P. Reed e R.W. Fast

59,61€ + 10% CARD

 The Fourth International Cryogenic Materials Conference (ICMC) was held in San Diego, California in conjunction with the Cryogenic Engineer- ing Conference (CEC) on August 10-l4, 1981.
ENGLISH

Advances In Cryogenic Engineering - Volume 31

95,40€ + 10% CARD

 The 1985 joint Cryogenic Engineering/International Cryogenic Materi- als Conference was held on the campus of the Massachusetts Institute of Technology, Cambridge, Massachusetts.
ENGLISH

Advances In Cryogenic Engineering - Parts A & B

383,59€ + 10% CARD

 Proceedings of the 1995 conference held in Columbus, Ohio, July, 17-21, 1995.
Loading results...

View more results