Search Results

ENGLISH

Computational Methods For Predicting Material Processing Defects - Proceedings Of The International Conference On Computational Methods For Predicting Material Processing Defects, September 8-11, 1987, Cachan, France

58,29€ + 10% CARD

 The papers in this book deal with computational methods for predicting material processing defects. Using recent advances in finite strain plasticity and viscoplasticity, damage modelling, bifurcation and instability theory, fracture mechanics and computer numerical techniques, new approaches to mechanical defect analysis are proposed. Appropriate methods for explaining and avoiding the defects leading to fracture, high porosity, strain localization or undesirable geometrical imperfections are presented. In addition, some papers are devoted to new formulations and new calculation algorithms to be used for solving the forming problems. Finally, two papers deal with physical description of defects occurring in forming and cutting operations, focusing on the academic and practical interest of these topics.This is the first book to deal with the prediction of defects occurring in material forming processes; it contains much of interest from both a theoretical and a practical viewpoint.
ENGLISH

Ordinary Differential Equations - Introduction To The Theory Of Ordinary Differential Equations In The Real Domain

by J. Kurzweil

58,29€ + 10% CARD

 The author, Professor Kurzweil, is one of the world''s top experts in the area of ordinary differential equations - a fact fully reflected in this book. Unlike many classical texts which concentrate primarily on methods of integration of differential equations, this book pursues a modern approach: the topic is discussed in full generality which, at the same time, permits us to gain a deep insight into the theory and to develop a fruitful intuition. The basic framework of the theory is expanded by considering further important topics like stability, dependence of a solution on a parameter, Carathéodory''s theory and differential relations.The book is very well written, and the prerequisites needed are minimal - some basics of analysis and linear algebra. As such, it is accessible to a wide circle of readers, in particular to non-mathematicians.
ENGLISH

Local Effects In The Analysis Of Structures

58,29€ + 10% CARD

 The question of inclusion of local effects in the analysis of structures is currently one of prime importance for engineering design. The classical computational approaches are not readily adapted to take local effects into account and appropriate treatments are therefore necessary. Providing an introduction to and survey of the specific computational methods, this book contains 16 papers, most of which were presented at the EUROMECH Colloquium `Inclusion of Local Effects in the Analysis of Structures'', held in France in 1984. The book begins with the various theories which allow the separation and determination of local and global effects. The next group of papers discuss edge effects for composite structures. The third part comprises two papers concerning dynamic problems and points the way towards non-conventional local effects in structural mechanics. The last part deals with general numerical methods, especially for effects due to large local variations of geometry.
ENGLISH

Boundary Integral Equation Methods In Eigenvalue Problems Of Elastodynamics And Thin Plates

by M. Kitahara

58,29€ + 10% CARD

 The boundary integral equation (BIE) method has been used more and more in the last 20 years for solving various engineering problems. It has important advantages over other techniques for numerical treatment of a wide class of boundary value problems and is now regarded as an indispensable tool for potential problems, electromagnetism problems, heat transfer, fluid flow, elastostatics, stress concentration and fracture problems, geomechanical problems, and steady-state and transient electrodynamics.In this book, the author gives a complete, thorough and detailed survey of the method. It provides the only self-contained description of the method and fills a gap in the literature. No-one seriously interested in eigenvalue problems of elasticity or in the boundary integral equation method can afford not to read this book. Research workers, practising engineers and students will all find much of benefit to them.Contents: Introduction. Part I. Applications of Boundary Integral Equation Methods to Eigenvalue Problems of Elastodynamics. Fundamentals of BIE Methods for Elastodynamics. Formulation of BIEs for Steady-State Elastodynamics. Formulation of Eigenvalue Problems by the BIEs. Analytical Treatment of Integral Equations for Circular and Annular Domains. Numerical Procedures for Eigenvalue Problems. Numerical Analysis of Eigenvalue Problems in Antiplane Elastodynamics. Numerical Analysis of Eigenvalue Problems in Elastodynamics. Appendix: Dominant mode analysis around caverns in a semi-infinite domain. Part II. Applications of BIE Methods to Eigenvalue Problems of Thin Plates. Fundamentals of BIE Methods for Thin Plates. Formulation of BIEs for Thin Plates and Eigenvalue Problems. Numerical Analysis of Eigenvalue Problems in Plate Problems. Indexes.
ENGLISH

Mathematical Theory Of Elastic And Elasto-Plastic Bodies - An Introduction

by I. Hlavacek e J. Necas

58,29€ + 10% CARD

 The book acquaints the reader with the basic concepts and relations of elasticity and plasticity, and also with the contemporary state of the theory, covering such aspects as the nonlinear models of elasto-plastic bodies and of large deflections of plates, unilateral boundary value problems, variational principles, the finite element method, and so on. <br><br>
ENGLISH

Theory Of Plasticity And Limit Design Of Plates

by Z. Sobotka

75,51€ + 10% CARD

 An extensive review of the theory of plasticity, limit design and limit analysis of plates is contained in this volume. Detailed descriptions are given on the plastic behaviour of homogeneous, reinforced and sandwich plates, and on the rise of various yield-line patterns. The volume differs from other books on the plastic analysis of plates by its comprehensive treatment of: the theory of yield fans connected with yield-line planning; the plastic behaviour of plates under combined loadings characterized by the load factors; statical solutions; and continuous, rectangular and skew plates.Before discussing the upper-bound solutions for various types of ultimate loads acting on isotropic, orthotropic and anisotropic plates, the kinematic conditions of the plastic behaviour of plates and the principles and methods of the yield-line theory are examined in detail. Generalized yield conditions of the second degree for orthotropic and anisotropic plates are introduced. Special attention is paid to the rise of yield fans. The concept of yield line planning is also discussed, which may be of practical interest since it indicates the possibilities for preventing the rise of yield fans. Upper-bound and lower-bound solutions for the ultimate uniform load, concentrated loads, triangular and trapexoidal loads, are presented. Similar solutions are provided for continuous loads bounded by various plane and curved surfaces and for various combinations of loads acting on rectangular, polygonal, circular, elliptic and skew plates. Solutions are given for plates on hinged supports, on free supports with elevating corners, on point supports and also for plates with built-in edges. Numerical tables are provided for determining the ultimate loads, bearing moments needed for the given load systems and the parameters of yield-line patterns. The procedures detailed in the volume will prove an indispensable reference source in the practical design of roof, ceiling and bridge slabs.
ENGLISH

Stability In The Dynamics Of Metal Cutting

by S.T. Chiriacescu

58,29€ + 10% CARD

 Numerous models have been proposed for the study of the dynamic behaviour of cutting tools. An analysis of the main works published over the past 20 years reveal a lack of general methodology in the mathematical modelling of the dynamic cutting process (CP) and in the elastic structure (ES), as well as the absence of efficient and general methods for identifying the conditions under which the amplitudes of the vibration chatter between tool and workpiece can become problematic.This book provides a thorough review on the mathematical modelling and stability analysis of the dynamic machining system, presenting solutions for the practical problems that can be encountered. The practical points of the stability and instability of the DMS are discussed, together with various aspects of the modelling and identification of the CP and ES systems. The latest findings are examined in the context of a general study using matrix equations. Such a study on the matrix method is timely in view of the rapid spread in the use of mini and micro-computers.Based on the matrix equations of the CP and ES systems, the general equations of the DMS with time-invariant parameters are established, and various procedures for the actual stability analysis of this system are presented. Many examples are accompanied by illustrations which also provide adequate practical instructions for other problems in the stability analysis of the DMS. The last part of the book deals with the modelling and stability analysis of the DMS with time-varying parameters, random parameters and random input. The work is addressed primarily to those interested in the design and exploitation of machine tools in both industry and research. It will also be of interest to applied mathematicians, and can be used as a reference book for advanced courses in mechanical engineering.
ENGLISH

Stress Analysis By Boundary Element Methods

by J. Balas, J. Sladek e V. Sladek

75,51€ + 10% CARD

 The boundary element method is an extremely versatile and powerful tool of computational mechanics which has already become a popular alternative to the well established finite element method. This book presents a comprehensive and up-to-date treatise on the boundary element method (BEM) in its applications to various fields of continuum mechanics such as: elastostatics, elastodynamics, thermoelasticity, micropolar elasticity, elastoplasticity, viscoelasticity, theory of plates and stress analysis by hybrid methods. The fundamental solution of governing differential equations, integral representations of the displacement and temperature fields, regularized integral representations of the stress field and heat flux, boundary integral equations and boundary integro-differential equations are derived. Besides the mathematical foundations of the boundary integral method, the book deals with practical applications of this method. Most of the applications concentrate mainly on the computational problems of fracture mechanics. The method has been found to be very efficient in stress-intensity factor computations. Also included are developments made by the authors in the boundary integral formulation of thermoelasticity, micropolar elasticity, viscoelasticity, plate theory, hybrid method in elasticity and solution of crack problems. The solution of boundary-value problems of thermoelasticity and micropolar thermoelasticity is formulated for the first time as the solution of pure boundary problems. A new unified formulation of general crack problems is presented by integro-differential equations.
ENGLISH

Strength Of Structural Elements

by Zbigniew Brzoska

75,51€ + 10% CARD

 This volume describes engineering applications of the mechanics of deformable bodies and the elasticity theory relevant to them. It is concerned mainly with one-dimensional problems, which arise because either one of the dimensions of a body is much greater than the remaining two or the functions of two or three variables may be reduced to one variable.Problems of this type are of twofold importance. Firstly, many engineering problems can be described with sufficient accuracy just in this way. Secondly, unidimensional problems with known analytical solutions may serve either for testing numerical methods or for the analysis of fundamental concepts and phenomena, whose physical nature in three-dimensional approach might be obscured by the analytical-numerical aspect. The authors have confined themselves for the most part to the analysis of elastic behaviour of structures; however some attention is also given to elastic problems. A deterministic approach has been applied throughout the book. It will serve as a springboard for further work with stochastic approaches which are being increasingly used in engineering practice today.
ENGLISH

Mechanics

by B. Skalmierski

58,29€ + 10% CARD

 Since mechanics is the science of motion, studies in this field now cover a wider range of problems than has been the case in earlier classical approaches. This has been achieved by the inclusion of aspects relating to the mechanics of continuous media, or strength problems. The topics covered in this book present a comprehensive treatment of the subject providing a broader perspective to the meaning of mechanics, in the modern sense of the word.Problems in the areas of strength of materials, hydromechanics and theory of elasticity are examined. The author has also endeavoured to show a certain universality of some methods seemingly specific to mechanics by tackling some problems involving electrical or electromechanical systems but based on Lagrange''s equations.The book has been designed to emphasize that mechanics is a deductive system, where the aim is not only to present mechanics as the science of motion but also to show that it serves as a bridge between mathematics and its applications, in the broadest sense of the word. Mechanical problems have inspired great mathematicians to come to grips with new mathematical problems, an excellent example here being the problem of the brachistochrone which initiated the development of the variational calculus. The book gives a comprehensive overview on new theoretical findings, and gives many applications which will prove indispensable to all those interested in mechanical and allied problems.
ENGLISH

Foundations Of Mechanics

by Stanislaw Bazanski

75,51€ + 10% CARD

 In the last three decades the field of mechanics has seen spectacular progress due to the demand for applications in problems of cosmology, thermonuclear fusion, metallurgy, etc. This book provides a broad and thorough overview on the foundations of mechanics. It discusses theoretical mechanics and continuum mechanics, as well as phenomenological thermodynamics, quantum mechanics and relativistic mechanics. Each chapter presents the basic physical facts of interest without going into details and derivations and without using advanced mathematical formalism. The first part constitutes a classical exposition of Lagrange''s and Hamilton''s analytical mechanics on which most of the continuum theory is based. The section on continuum mechanics focuses mainly on the axiomatic foundations, with many pointers for further research in this area. Special attention is given to modern continuum thermodynamics, both for the foundations and applications. A section on quantum mechanics is also included, since the phenomenological description of various quantum phenomena is becoming of increasing importance. The work will prove indispensable to engineers wishing to keep abreast of recent theoretical advances in their field, as well as initiating and guiding future research.
ENGLISH

Vibrations And Waves (Part B: Waves) - Vibrations And Waves (Part B: Waves)

by S. Kaliski

58,29€ + 10% CARD

 This book gives a comprehensive overview of wave phenomena in different media with interacting mechanical, electromagnetic and other fields. Equations describing wave propagation in linear and non-linear elastic media are followed by equations of rheological models, models with internal rotational degrees of freedom and non-local interactions. Equations for coupled fields: thermal, elastic, electromagnetic, piezoelectric, and magneto-spin with adequate boundary conditions are also included. Together with its companion volume Vibrations and Waves. Part A: Vibrations this work provides a wealth of information about dynamical phenomena in different media and fields, which will be of considerable interest to both scientists and graduate students.
ENGLISH

Mechanics Of Materials And Structures

58,29€ + 10% CARD

 A wide range of topics in the area of mechanics of materials and structures are covered in this volume, ranging from analysis to design. There is no special emphasis on a specific area of research. The first section of the book deals with topics on the mechanics and damage of concrete. It also includes two papers on granular packing structure changes and cumulative damage in polymers. In the second part more theoretical topics in mechanics are discussed, such as shell theory and nonlinear elasticity. The following section dicusses areas dealing primarily with plasticity, viscoelasticity, and viscoplasticity. These include such topics as dynamic and cyclic plasticity. In the final section the subject is structural dynamics, including seismic analysis, composite frames and nonlinear analysis of bridges. The volume is compiled in honor of Professor Maciej P. Bieniek who has served as a teacher and researcher at several universities, and who has made many significant contributions in the evaluation, rehabilitation, and design of infrastructures.
ENGLISH

Advances In Micromechanics Of Granular Materials - Proceedings Of The Second Us/Japan Seminar On Micromechanics Of Granular Materials, Potsdam, Ny, Usa, August 5-9, 1991

58,29€ + 10% CARD

 The 45 papers presented in this volume all share the common goal of constructing continuum models based on the micro behaviours of granular materials. Computer simulations continue to provide observations to aid modelling, while new experimental works begin to show promise for increased understanding in this area. Theoretical studies have extended into transitions between the rapid and quasi-static regimes and the fluid and solid mixture flows. Exciting new topics discussed in this volume include: concepts of a measure for randomness in quasi-static granular materials, which is analogous to the granular temperature in a rapid flow; scaling effects in granular media and their implications in both physical and computer simulations; instability; and boundary effects on heterogeneous behavior in simple flow configurations, which are posing new challenges for mathematical modelling. The volume will prove indispensable reading for researchers interested in the current developments in the fundamental aspects of mechanics of granular materials.
ENGLISH

Numerical Methods For Problems In Infinite Domains

by D. Givoli

58,29€ + 10% CARD

 This volume reviews and discusses the main numerical methods used today for solving problems in infinite domains. It also presents in detail one very effective method in this class, namely the Dirichlet-to-Neumann (DtN) finite element method. The book is intended to provide the researcher or engineer with the state-of-the-art in numerical solution methods for infinite domain problems, such as the problems encountered in acoustics and structural acoustics, fluid dynamics, meteorology, and many other fields of application. The emphasis is on the fundamentals of the various methods, and on reporting recent progress and forecasting future directions. An appendix at the end of the book provides an introduction to the essentials of the finite element method, and suggests a short list of texts on the subject which are categorized by their level of mathematics.
ENGLISH

Mechanics Of Composite Materials - A Unified Micromechanical Approach

by Jacob Aboudi

58,29€ + 10% CARD

 In the last decade the author has been engaged in developing a micromechanical composite model based on the study of interacting periodic cells. In this two-phase model, the inclusion is assumed to occupy a single cell whereas the matrix material occupies several surrounding cells. A prominent feature of the micromechanical method of cells is the transition from a medium, with a periodic microstructure to an equivalent homogeneous continuum which effectively represents the composite material. Of great importance is the significant advantage of the cells model in its capability to analyze elastic as well as nonelastic constituents (e.g. viscoelastic, elastoplastic and nonlinear elastic), thus forming a unified approach in the prediction of the overall behaviour of composite material. This book deals almost exclusively with this unified theory and its various applications.
ENGLISH

Convex Models Of Uncertainty In Applied Mechanics

by I. Elishakoff e Y. Ben-Haim

58,29€ + 10% CARD

 Recognition of the need to introduce the ideas of uncertainty in a wide variety of scientific fields today reflects in part some of the profound changes in science and engineering over the last decades. Nobody questions the ever-present need for a solid foundation in applied mechanics. Neither does anyone question nowadays the fundamental necessity to recognize that uncertainty exists, to learn to evaluate it rationally, and to incorporate it into design.This volume provides a timely and stimulating overview of the analysis of uncertainty in applied mechanics. It is not just one more rendition of the traditional treatment of the subject, nor is it intended to supplement existing structural engineering books. Its aim is to fill a gap in the existing professional literature by concentrating on the non-probabilistic model of uncertainty. It provides an alternative avenue for the analysis of uncertainty when only a limited amount of information is available. The first chapter briefly reviews probabilistic methods and discusses the sensitivity of the probability of failure to uncertain knowledge of the system. Chapter two discusses the mathematical background of convex modelling. In the remainder of the book, convex modelling is applied to various linear and nonlinear problems. Uncertain phenomena are represented throughout the book by convex sets, and this approach is referred to as convex modelling.This book is intended to inspire researchers in their goal towards further growth and development in this field.
ENGLISH

Advances In The Theory Of Plates And Shells

58,29€ + 10% CARD

 Plates and shells play an important role in structural, mechanical, aerospace and manufacturing applications. The theory of plates and shells have advanced in the past two decades to handle more complicated problems that were previously beyond reach. In this book, the most recent advances in this area of research are documented. These include topics such as thick plate and shell analyses, finite rotations of shell structures, anisotropic thick plates, dynamic analysis, and laminated composite panels. The book is divided into two parts. In Part I, emphasis is placed on the theoretical aspects of the analysis of plates and shells, while Part II deals with modern applications. Numerous eminent researchers in the various areas of plate and shell analyses have contributed to this work which pays special attention to aspects of research such as theory, dynamic analysis, and composite plates and shells.
ENGLISH

Stability Of Structures By Finite Element Methods

by Cz. Cichon, M. Radwanska e Z. Waszczyszyn

58,29€ + 10% CARD

 This book is the consequence of research undertaken by the authors in the field of advanced problems of structural mechanics. Stability analysis of structures comes under this area because of the complex models and computational methods needed for analysis. In the mid seventies, a joint effort began between a group of researchers and teachers of the Department of Civil Engineering and Computer Center of the Cracow University of Technology. One of the important results of the collaboration has been this publication.
ENGLISH

Inelasticity And Micromechanics Of Metal Matrix Composites

58,29€ + 10% CARD

 This book contains fifteen papers based on the presentations made at the symposium on "Inelasticity and Micromechanics of Metal Matrix Composites" held at the University of Washington, USA, in mid-1994. The papers represent the most recent work conducted on inelasticity and micromechanics of metal matrix composites. The book is divided into two parts: Part I deals with the study of inelastic deformation in metal matrix composites, while Part II tackles the micromechanical aspects of metal matrix composites. The articles discuss different aspects of these two topics ranging from purely theoretical treatments to extensive experimental investigations. Many of the papers are by prominent researchers working in this area.
ENGLISH

Advanced Theories Of Hypoid Gears

by S.K. Ghosh e Xudong Wang

58,29€ + 10% CARD

 In order to develop more efficient types of gears, further investigation into the theories of engagement is necessary. Up until now most of the research work on the theories of engagement has been carried out separately on different groups, and based on individual types of profiles. This book aims at developing some universal theories, which can not only be used for all types of gears, but can also be utilized in other fields such as sculptured surfaces. The book has four characteristics: the investigations are concentrated on mismatched tooth surfaces; all the problems are dealt with from a differential geometry point of view; most theories and algorithms are universal in application; and the algorithms are easy to follow and can be used in real situations. In the process of developing the algorithms, the authors have introduced some mathematical methods which are believed to be innovative with regard to the theories of engagement known so far. A theoretical treatment is presented throughout the book, supported by numerical examples and experiments. With the computer programs listed at the end of the volume, any of the proposed methods can be easily utilized in practice.The book is intended for postgraduate students, lecturers, professors, or research staff in mechanical/manufacturing engineering, mathematics and R & D departments of research institutes and universities. It will also be useful for engineers working in the gear manufacturing sector of industry.
ENGLISH

Problems Of Technological Plasticity

by B. Druyanov e R. Nepershin

58,29€ + 10% CARD

 In this book the classical rigid-plastic model of deformed workpiece and the characteristic (slipline) method of analysis is assumed. The rigid-plastic solid assumption is deemed reasonable for the problems of technological plasticity with large scale plastic flow, where small elastic stains are negligible. Along with classical results of the theory of plasticity the book includes many original analytical and numerical solutions of the problems of technological plasticity obtained by the authors in Russia and unknown for most western readers. The results of the analyses are given by analytical formulae and many graphs and tables, so the book will be useful for the practical and research engineers. It may also be used as a textbook by graduate students and engineers.
ENGLISH

Probabilistic And Convex Modelling Of Acoustically Excited Structures

by I. Elishakoff, L.P. Zhu e Y.K. Lin

58,29€ + 10% CARD

 This book summarises the analytical techniques for predicting the response of linear structures to noise excitations generated by large propulsion power plants. Emphasis is placed on beams and plates of both single-span and multi-span configurations, common in engineering structural systems. Since the natural frequencies and the associated normal modes play a central role in the random vibration analysis of a continuous dynamical system, rather detailed discussions are devoted to their determination. Material covered in the first chapter provides a useful reference for the subsequent discussion of multi-span structures. Also included in this volume is a hybrid probabilistic and convex-uncertainty modeling approach in which the upper and lower bounds of the cross-spectral densities of the acoustic excitation are obtained on the basis of measured data. The random vibration of a structure is treated, for the first time, as an "anti-optimization" problem of finding the least favourable value of the mean-square response.
ENGLISH

Micromechanics Of Granular Materials - Proceedings Of The U.S./Japan Seminar On The Micromechanics Of Granular Materials, Sendai-Zao, Japan, October 26-30, 1987

58,29€ + 10% CARD

 This proceedings volume contains papers from researchers in Japan, the United States and England who have made fundamental contributions to the micromechanics of granular materials. The purpose of the seminar was to facilitate an exchange of ideas between scientists working with statistical and continuum theories, computer simulations and experiments on both static and dynamic behaviour. In describing the solid like behaviour of granular materials, many new ideas on the constitutive relations are introduced in this volume. As an application of the analysis, the mechanism of liquefaction is discussed. Computer simulations have become a vital tool in establishing the micromechanical approaches which otherwise would not be experimentally tested. In numerical simulations and theoretical analyses of rapid granular flow, various modifications on the nature of materials and boundaries are given. Possible applications of the techniques of the stereology and analysis based on geometrical statistics are also included. The papers collected in this volume signify that the promotion of a good understanding of the mechanics of granular materials has been and will continue to be valued in a variety of technical disciplines.
Loading results...

View more results